SmarterEd

Aussie Maths & Science Teachers: Save your time with SmarterEd

  • Login
  • Get Help
  • About

ENGINEERING, PPT 2026 HSC 27a

The circuit for a mains power adapter used to charge a laptop battery is shown.

Describe the functions of the transformer and the rectifier in this application. (4 marks)

--- 7 WORK AREA LINES (style=lined) ---

Show Answers Only

Transformer

  • Steps down the high 240 V AC mains voltage to a lower, more useable and safe AC voltage for the laptop (e.g. 20 V).
  • It works by electromagnetic induction, with the turns ratio of the primary and secondary coils setting the output voltage.
  • It also electrically isolates the low-voltage side from the mains for safety.

Rectifier

  • The full bridge of four diodes converts the stepped-down AC into DC by allowing current to flow through the load in one direction only during both halves of each AC cycle (full-wave rectification).
  • The capacitor then acts as a smoothing filter, reducing the voltage ripple to give a more constant DC output, which is required to charge the battery.
Show Worked Solution

Transformer

  • Steps down the high 240 V AC mains voltage to a lower, more useable and safe AC voltage for the laptop (e.g. 20 V).
  • It works by electromagnetic induction, with the turns ratio of the primary and secondary coils setting the output voltage.
  • It also electrically isolates the low-voltage side from the mains for safety.

Rectifier

  • The full bridge of four diodes converts the stepped-down AC into DC by allowing current to flow through the load in one direction only during both halves of each AC cycle (full-wave rectification).
  • The capacitor then acts as a smoothing filter, reducing the voltage ripple to give a more constant DC output, which is required to charge the battery.

Filed Under: Electricity/Electronics Tagged With: Band 5, smc-3720-20-Circuit diagrams, smc-3720-30-AC/DC

ENGINEERING, PPT 2025 HSC 25c

The table below shows three different rectification circuits.

Complete the table by:

  • naming the rectification process
  • sketching DC waveform after rectification
  • outlining the function of the capacitor in the circuit.   (4 marks)

    --- 0 WORK AREA LINES (style=lined) ---

Show Answers Only

Show Worked Solution


♦♦ Mean mark 38%.

Filed Under: Electricity/Electronics Tagged With: Band 5, smc-3720-20-Circuit diagrams, smc-3720-30-AC/DC

ENGINEERING, PPT 2019 HSC 6 MC

The schematic diagram shows a bridge rectifier.
 

What is the function of this bridge rectifier?

  1. To increase voltage
  2. To decrease voltage
  3. To convert DC to AC
  4. To convert AC to DC
Show Answers Only

`D`

Show Worked Solution
  • All rectifiers use one directional diodes to control current and convert AC to DC.

`=>D`

Mean mark 59%.

Filed Under: Electricity/Electronics Tagged With: Band 4, smc-3720-20-Circuit diagrams, smc-3720-30-AC/DC

ENGINEERING, TE 2022 HSC 11 MC

A diode bridge is used to convert AC to DC current.

What type of conversion is this known as?

  1. Partial rectification
  2. Inverse rectification
  3. Full wave rectification
  4. Half wave rectification
Show Answers Only

`C`

Show Worked Solution
  • If a diode bridge is used, the conversion will be full wave rectification.

`=>C`


♦♦ Mean mark 38%.

Filed Under: Electricity/Electronics, Electricity/Electronics Tagged With: Band 5, smc-3720-30-AC/DC, smc-3730-50-Circuits

Copyright © 2014–2026 SmarterEd.com.au · Log in