smc-3721-40-AS 1100

ENGINEERING, PPT 2023 HSC 27b

A portion of a roller coaster wheel sub-assembly is shown.

An exploded pictorial of the wheel sub-assembly is shown.

Complete an assembled sectioned front view of the wheel sub-assembly at scale 1: 2. Apply AS 1100 drawing standards. Do NOT add dimensions. (6 marks)

--- 0 WORK AREA LINES (style=lined) ---

Show Answers Only

Show Worked Solution

♦ Mean mark 49%.

ENGINEERING, PPT 2017 HSC 19 MC

An engineering component is required to have the following features:

30 mm spotface
10 mm counterbore, 8 deep
6 mm through.

Which of the following shows the correct dimensioning?

Show Answers Only

Show Worked Solution

→ The vertical arrow represents how deep the counterbore should be, which is 8mm (given in question), therefore the answer is A or C.

→ However C does not have the correct symbol for counterbore, instead just stating 2 diameters next to each other.

ENGINEERING, PPT 2017 HSC 4 MC

Specifications for a Ø10 steel bar require it to have a tolerance of 0.05 mm.

What is the permitted range of diameters for this bar?

9.9010.00 mm
9.9510.00 mm
9.9510.05 mm
10.0010.05 mm

Show Answers Only

Show Worked Solution

Upper limit = 10.00 + 0.05 = 10.05 mm

Lower limit = 10.00 – 0.05 = 9.95 mm

ENGINEERING, CS 2016 HSC 23a

This diagram shows the cross-section of a highway pavement drawn using AS 1100 drawing standards.

Explain the benefits of using AS 1100 drawing standards in the preparation of engineering drawings such as the one above. (3 marks)

--- 6 WORK AREA LINES (style=lined) ---

Show Answers Only

Benefits of using AS 1100 standards

→ Communication between manufacturers and designers is of higher quality, more accurate and involves fewer ambiguities.

→ AS 1100 is based on international standards so drawings can be easily shared between countries.

→ One project can be assigned multiple designers.

→ Cost effective as interpretation errors are minimised.

Show Worked Solution

Benefits of using AS 1100 standards

→ Communication between manufacturers and designers is of higher quality, more accurate and involves fewer ambiguities.

→ AS 1100 is based on international standards so drawings can be easily shared between countries.

→ One project can be assigned multiple designers.

→ Cost effective as interpretation errors are minimised.

ENGINEERING, PPT 2018 HSC 4 MC

A line specified in AS 1100 is shown.

Which feature is this line typically used to indicate?

Centre-line
Cutting plane
Hidden feature
Fictitious outline

Show Answers Only

Show Worked Solution

→ Although similar to a centre line, cutting planes can be identified by the thick dark ends.

♦♦♦ Mean mark 21%.

ENGINEERING, CS 2019 HSC 4 MC

A general purpose bolt drawn to AS 1100 drawing standards is shown.

What is the diameter of the bolt?

8.75 mm
10.00 mm
14.00 mm
18.00 mm

Show Answers Only

Show Worked Solution

→ The width of the head of a bolt is 0.7 × the diameter, therefore the diameter is 10 mm.

♦ Mean mark 50%.

ENGINEERING, PPT 2021 HSC 4 MC

Which engineering drawing shows a bracket correctly dimensioned to AS 1100 drawing standards?

Show Answers Only

Show Worked Solution

By elimination:

→ Arrowheads are used for measurements instead of crosses (eliminate and ).

→ In the radius symbol points to the arrow marking diameter (eliminate ).